| Acoustic Insulation | |
|
The NuWave Noise Barrier range has been designed to meet high performance requirements and Australian Building Code requirements. The NuWave range is based on high density, limp mass polymers to take the energy out of sound waves, right across the hearing frequency spectrum. NuWave barriers are flexible, inexpensive and can tame home theatre systems, aircraft noise, high trafficable areas, impact noise through walls and floors and engine noise and machine enclosures. |
|
|
|
NuWave™ High Performance Flexible Noise Barrier The heart of the NuWave range is the dense polymer technology that has been proven to reduce noise in heavy industrial plants. We have taken this technology and applied it to many of our products but the two most common are NuWave “Base” and NuWave “4Zero” NuWave™ “Base”
*Rw rating is a single number quantity summarizing the transmission loss of a material over the frequency range from 100Hz to 3.15 kHz under AS/NZS 1276.1:1999. Independent test reports available. |
|
NuWave “4Zero”™ NuWave’s 4-Zero barrier is the same as the “Base” product but with a flexible aluminium film facing. The aluminium facing gives the barrier excellent fire resistant properties when tested to AS 1530.3. This additional flammability rating is important in some applications in buildings and the foil facing also allows reinforced foil tapes to be used to join two pieces of 4Zero together when overlapped. Roll Sizes and acoustic ratings as for “Base” above. |
|
|
|
NUWRAP 5™ Pipe & Duct Insulation For noisy pipes in buildings, NuWrap 5™ is the effective and easy-to-install solution. Also suitable for ducting and ventilation fans, it is supplied with 4-Zero foil facing as standard. Designed to meet the latest building codes, NuWrap 5 is available in Rolls, as precut “Flat Packs” and as Pre-Fabricated Fittings for quick and easy installation. NuWrap 5™ combines acoustic convoluted open cell foam laminated to NuWave 4Zero Barrier. Nuwrap 5™ complies with BCA standards. It not only achieves the set requirements in all States & Territory's but has one of the highest acoustic reductions in the industry. There is no requirement for additional acoustic insulation (batt in ceiling not required) within any typical construction to achieve BCA requirements in all States & Territory's. NuWrap 5™ , including Queensland and is also approved by th Gold Coast City Council Certification Group. NuWrap 5 is GreenStar compliant and meets ODP-EMI9 requirements in that there are no Ozone depleting substances used in either the manufacturing process or the material composition. Product Dimensions: 1.35mtr x 3mtr Roll "5mtr Roll length also available upon request" Precut "Flat Pack" Products: Suit Pipe diameters from 40mm to 225mm also available to suit most PVC fittings
|
 |
NuWave™ Impact for Floors & Walls Noise transmission through walls and floors is one of the most commonly reported causes of noise complaints in commercial and multi-residential buildings. The BCA of Australia now includes impact isolation for floors. NuWave has energy absorbing foam and sound barrier composites available for timber and concrete floors and walls and exceeds the BCA impact isolation benchmark by a large margin.
|
|
NUWAVE Engine Insulation To counter the high noise levels of engines, compressors, generators and industrial machinery, NuWave has a range of High Performance Composites that combine acoustic foams, barriers and facings to give the best possible noise reduction. NuWave Engine Insulation is made up of 4kg/m2 NuWave Barrier sandwich between flat open cell foams. All Engine Insulation comes with a 4-Zero foil barrier finish and is available with an adhesive backing if required for ease of installation.
|
|
