Thermotec - Pipe Insulation

Thermotec Thermal Pipe Insulation
All grades of Thermotec thermal pipe insulation have similar performance in relation to operating temperature, thermal conductivity, non-toxicity and moisture absorption. Fire performance, noise attenuation, chemical resistance, size, wall thickness availability and cost are factors which will usually lead to the selection of a specific grade of Thermotec pipe insulation. Thermotec pipe insulation can be used on any piping system whether it is Copper, Plastic, Rheau, Fusiotherm and Aquatherm. Thermotec 4-Zero Pipe Insulation in the most widely specified pipe insulation for commercial projects in Australia and is manufactured in Australia by an Australian owned and operated company. Thermotec's Polytube, Sealed Tube, Quickseal, 4-Zero & Thermalag Thermal Pipe Insulation is GreenStar compliant and meets ODP-EMI9 in that there are no ozone depleting substances used in either the manufacturing process or the product composition. Click here to Download Current Brochure
	Thermotec 4-Zero Thermotec 4-Zero Thermal Pipe Insulation Incorporating a factory applied reinforced aluminium covering for optimum fire performance in accordance with AS 1530.3 Dimensions: 15mm, 20mm, 25mm & 30mm wall thicknesses product covers 12mm to 100mm pipe
	Thermotec Sealed Tube Economic thermal pipe insulation alternative to Quick Seal grade, particularly suitable where pipework is insulated prior to installation. Dimensions: 10mm, 15mm & 20mm wall thicknesses product covers 12mm to 100mm pipe
	Thermotec Quick Seal Preformed flame retarded thermal pipe insulation, incorporating unique press seal fastener for quick and easy application on installed pipework. Dimensions: 10mm, 15mm & 20mm wall thicknesses product covers 12mm to 100mm pipe
	Thermotec Polytube Thin walled green coloured pipe insulation for domestic applications and dead legs on recirculating hot water systems. Also can be used in rough ins on copper and plastic piping systems. Dimensions: 6mm wall thickness product covers 12mm, 15mm and 20mm pipe
	Thermotec Thermalag - Thermal Pipe Insulation Foam sheet cut to predetermined width to exactly fit large diameter pipe. Grooved on inside to eliminate tension and facilitate quick and easy application. Available with AS/NZS 1530.3 fire performance or alternatively with our standard foam finish. Dimensions: 10mm, 15mm, 20mm & 25mm wall thicknesses product covers pipe work above 100mm internal diameter pipe
	Thermotec F.P.I. (Fibreglass Pipe Insulation) High density fibre glass incorporating a factory applied reinforced aluminium covering for optimum fire protection in accordance with AS 1530.3 Thermotec's F.P.I. pipe insulation is recommended on steam and solar hot water pipes, as the pipes can reach excessive temperatures. operating temperature for Thermotec F.P.I. pipe insulation ranges from -10 deg to +480 deg. Dimensions: 25mm, 38mm & 50mm wall thicknesses product covers 12mm to 200mm pipe Thermotec E-flex Solar Hot Water Pipe Insulation Thermotec E-flex is a "fit for purpose" Solar Hot Water pipe insulation. It is manufactured from EPDM closed cell foam and has excellent UV resistant properties allowing for many years of exposure outdoors without deterioration or cracking. Thermotec E-flex is also suitable for the higher temperatures experieced with Solar Hot Water lines and can operated at 150 degrees celsius with maximum intermittent to 175 degrees celsius. Click here for E-flex Data Sheet
	Click here for all insulation specification and data tables